There is a saying in the industry about automobile film sticking - "three parts of film, seven parts of film", which refers to the importance of construction in automobile film sticking. After all, if the construction is not in place, no matter how good the membrane is, it will not show its "charm", and it is likely to bring various "sequelae", such as blistering, water ingress, scratching the glass, etc.
Therefore, we must find professional service brands for automobile film, such as film world film. In order to make each film into an impeccable art, a complete film sticking standard has been carefully established, and the film sticking technology from tools to technicians is strictly controlled.
Because in the eyes of every film technician, each film is an artistic creation. The car with the film carefully pasted is their carefully crafted work. They hope to use a heart of creating treasures in exchange for customers' cherish and care. Every film pasted can be carefully maintained. If you do not know how to maintain the film, please continue to read.
1、 Park the car in a sunny place as far as possible within one week after the film is pasted to ensure that the water vapor in the film is fully evaporated.
2、 Do not wash the car within three days after the film is applied, so as to avoid falling off of the film due to wet water; If the car is dirty when applying the film, wash the car first and then apply the film.
3、 Do not open the defogging line of the rear window within seven days after the film is pasted, so as to avoid adverse effects on the defogging line caused by wet water.
4、 Misty water vapor will be found in the film for a period of time. This is a normal phenomenon during the drying process of the film. It will slowly disappear after a period of time.
5、 Try not to lift or lift the window within 5-7 days after applying the film, especially for new vehicles that have just applied the film, so as to prevent the edge of the film from curling or displacement during the opening and closing process of the window.
6、 After the film is applied to the vehicle, try not to directly paste or hang anything on the window, so as not to pull up the suction cup and the paste, which will open the gap of the film and affect the film effect.
7、 If the film surface is stained, do not use chemical solvent to wipe the film surface.
Use a wet towel, paper towel or cotton cloth with detergent, or use a rubber wiper to clean.
Film pasting is an art, and every time you make an ingenious work, you should not be let down. The film world is equipped with a standard dust-free workshop, which is strictly in accordance with the international standard of closed dust-free. The main facilities include closed workshop, spray type dust removal facilities, air humidifier, air conditioner, etc. to reduce the probability of dust entering the membrane and glass, plus_ The intensive lighting system in the boarding room ensures that professional technicians can accurately carry out each step of construction under sufficient light. The construction workshop is separated by transparent glass. On the one hand, it ensures the quality of automobile film coating construction, on the other hand, it also allows car owners to have a detailed understanding of the actual process of film coating construction.
The above is Jinan automobile film http://www.sd28222.com/ Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call us for consultation!